Home » Passenger Elevators

Passenger Elevators

Beacon Elevator Co. Pvt. Ltd.
A Passenger lift is designed to ferry people from point A to Point B vertically. The modern passenger lift is a simple means of transport within a building. Passenger elevators capacity is related to the available floor space. Generally passenger elevators are available in typical capacities from 4 TO 26 PASSENGERS and speed varying between 0.5 Meter/sec to 2.5 Meter/Sec. Choice of passenger elevator typically depends on type of building (Commercial, Residential, Hotel, Mall, Housing society etc.,) and parameter such as passenger traffic movement. Budget involved is also a deciding factor between manual door and auto door passenger elevators. Beacon offers all types of passenger elevator whether auto door or manually operated doors with variety of aesthetic choices for interior, flooring & false ceiling.
Passenger Elevators - Minimum Civil Dimension
Beacon Elevator Co. Pvt. Ltd.

Note : In case of manually operated doors, clear entrance will be reduced by the amount of projection of handle on the landing door.
Speed in m/s Upto 0.70 >0.70<1.00 >1.00<1.50 >1.50<1.75 >1.75<2.00 >2.00<250
Pit Depth 1350 1500 1600 2150 2200 2500
Overhead 4200 4250 4800 4800 5200 5400
Machine-room depth L D+2000 D+2500
Machine-room width K C+1000 C+1200 C+1500

Passenger Elevators - Features
Beacon Elevator Co. Pvt. Ltd.
  • Adjustable Door Opening & Closing Time
  • Alarm Button
  • Car Call Cancellation at Terminal Stop
  • Attendant
  • Direction Arrow and Position Indicator on all Stops
  • Home Landing
  • Phase Failure and Phase Reversal Protection
  • Repeated Door Closing in the event of Lock Failure
  • Door Protection by Light Beams (2 Beams)
  • Door Protection by Light Curtain
  • Emergency Lighting
  • Intercom Car to Machine Room
  • Overload Indicator
  • Automatic Rescue Device
  • Compulsory Stop
  • Duplex, Triplex, Quadruplex Control
  • Direction Pre-announcing with Arrival Going
  • Opposite Door Operation
Passenger Elevators - Sample Drawing
Beacon Elevator Co. Pvt. Ltd.

  1. Construct the shaft (230mm brick / 150mm RCC Walls) and Machine Room Slab (with Pockets) in accordance with our GA drawings.
  2. Mason with material for minor builder's work such as pocket cutting, grouting, door fixing etc.
  3. Temporary power connection for erection & testing work.
  4. Scaffolding till the time of erection for about 30 days.
  5. Access to Machine room, Machine beams, supporting beams, pit ladder etc.
  6. Power supply(415 Volts, 3 Phase,4 Wires with Neutral,50 Hz. & 230 Volts 1 Phase) near our control panel with MCB/JUNCTION BOX.